Self Adhesive Printable Security Labels, Tamper Proof 3D Laser
The material of custom self adhesive tamper proof hologram sticker.
|Frangile grade||Models||Suitable conditions|
|A||11A,11A0,DO,D4||for small sizes labels and for the straight corners labels.These
models cannot be die cutting,because the facestock is too frangible|
|B||11CA2,D3||can be die cutting by hands (not by machine)|
|C||11CA4,D2||can be die cutting by MACHINE|
|D||12A3||for cold temperature|
Grade A:very brittle of the facestock,But it is hard to cut the
Grade B:moderate brittle of the facestock,but it is tend to Grade
A.The spare papers cannot be cutted by
hand,cannot by machine
Grade C:moderate brittle of the facestock,but it is tend to Grade
D.The spare papers can be cutted by
Grade D:the facestock is not very easy brittle.The spare papers can
be cutted by machine.
The difference between others' products and ours.
1). The glue:
Our glue is water-based glue, the labels will have a good effect
after stuck on something surface. 48 hours latter, the glue will
permeate into the surface and it will be very sticky! That is
because we have moisturizing processing, it can make the users to
print and stick the labels simply!
Others use oil-based glue, they will be very sticky and will have
good sticky effect in the beginning. But as the days passed away,
the labels will be no sticky and drop down.
2) The paper:
Our paper have moisturizing processing so that user can print and
stick the labels simply. And you could keep them for a half years
without destructed after the stickers were stuck on the products.
The paper of other's are very brittle. You will think it is good of
the brittle at first. But they will be destructed before printing
in low temperature. Because the brittleness is changed by the
The lower temperature, the higjer brittleness, especially those low